Spectra Physics Mai Tai DeepSee laser system / Manufactured 07/2011 / Tunable from 690 nm to 1040 nm / Dispersion compensation

 

Coherent Ultrafast laser system / Model: Chameleon / Manufactured 09/2005 / 12 watt Verdi pump / Less than 555 hours on the head and diodes

 

APE Coherent Chameleon Compact OPO Optical Parametric Oscillator

 

JK Fiber Laser welding system / Includes System 5000 Work Station with JK2000FL 2000 watt fiber laser source / Manufactured 2014 / 1080 nm output / Currently setup for welding, capable of cutting and drilling / Equipped with Aerotech PRO165 X and Y axis stages and an Aerotech PRO115 Z axis stage with A3200 drivers / System is in new/unused condition

 

Lumonics 700 Series Pulsed Nd:YAG Laser / Model JK 702H / Rated 350 Watts / 1064 nm / Please contact us if you need only a certain component. We will part out or sell the entire system.

 

Spectra Physics Mai Tai Ultrafast laser system / Femtosecond single-box Ti:Sapphire oscillator, 10 W Millennia pumped, with automated wideband wavelength tuning from 710 to 950 nm, pulsewidth < 80 fs / System is in excellent condition with less than 840 hours of use on the head

 

Spectra-Physics Quanta-Ray Pulsed Nd:YAG Laser / Model PRO-230 / 1064 nm and 532 nm operation / Manufactured May 2001 / Rated 1250 mJ/pulse @ 1064 nm, 650 mJ/pulse @ 532 nm / 8-12 ns pulse width at 1064 nm, 6-10 ns pulse width at 532 nm / 220/240 V, single phase power required

 

 

Coherent Infinity Q-switched pulsed YAG laser Rating: 0.1-50 Hz rep rate: 500 mj/pulse at 1064 nm 250 mj/pulse at 532 nm Pulse width of 3.5 ns at 1064 nm, and 3 ns at 532 nm 50-100 Hz rep rate: 400 mj/pulse at 1064 nm 200 mj/pulse at 532 nm Divergence, full angle: < 9.7 mrad Line width: single longitudinal mode < 2x transform limit due to diode pumped injection seeded oscillator Single shot: < 250 MHz Timing jitter: < 500 psec SBS cell (phase conjugate mirror) for wave front phase correction Output beam size: 5.5mm Includes manual and software. XPO Type II (OPO) and XPO-UV currently installed. Tuning Range – Signal: 420 to 650 nm, Idler: 2200 to 1000 nm, SHG: 210 to 325 nm (420 to 650 nm)

 

Coherent Equinox-Pilot laser system for use in crystalline-silicon(c-Si) solar cell manufacturing production / It is configured with a load/unload wafer turntable and two Coherent laser systems / The first is a Coherent Talisker 355-4 (4W @ 355nm), and the second is a Coherent Avia 355-20 (20W @ 355nm) / This system was manufactured in 2009

 

Lee Laser Pulsed Diode-Pumped Nd:YAG Laser System / Model LDPP-50M / Manufactured August 2009 / Rated 50 watts / Less than 750 hours use / Includes beam delivery model N3307-1 Fiber CCTV assembly with B/W CCTV / 220V single phase power required / Tested operational (please see image, power meter is set on the 150 watt range)

 

Telesis Fiber Laser Marking/Engraving System / FQ10 Model 6 / Windows based Merlin II LS Visual Design Software / Manufactured October 2008 / 160 mm lens with 3.5″ X 3.5″ marking field / Air-cooled / 10 Watt fiber laser / 110 volt operation / Includes enclosure with 2 bay rotary / System powers up and was able to mark/engrave metal running a test program

 

Telesis Fiber Laser Marking/Engraving System / Model Zenith 10F / Windows XP based Merlin II LS Visual Design Software / Manufactured August 2006 / 163 mm lens with 4.33″ X 4.33″ marking field / Air-cooled / 10 Watt fiber laser / 110 volt operation / Includes enclosure with manual Z-axis bedplate and red pilot/pointer laser / System powers up and was able to mark/engrave metal running a test program

 

Laservall Beamer Ultra-Dex Laser Marking/Engraving System / Model Violino / Windows XP based Laservall Smartist version 4.1 software / Air-cooled / Diode pumped solid state laser / Q-Switched Nd:YAG / 1064nm / 4.3 inch marking field / 110 volt operation / Includes enclosure with motorized Z-axis and red pilot/pointer laser / We believe this is a 10 watt system / System powered up and was able to mark/engrave metal running a test program

 

CLC Control Laser Corp. Nd:YAG laser marking/engraving system / Model Insignia LX-900 / Manufactured June 2000 / 1064 nm / Software upgraded to Prolase Plus for Windows XP / Includes enclosure, motorized z-axis with digital readout, red diode aiming beam / Requires 230 volt, single phase, 60 Hertz, 50 amps / Tested operational

 

Synrad FireStar CO2 Laser Tube Cutting System / Model FSF400SB / Manufactured September 2006 / Rated 400 Watts / 230 Volt, 3 Phase

 

Coherent HighLight DUO fiber delivered diode laser system / Model HighLight FAP 30 / Wavelength 800-820nm / Rated 30 watts / Manufactured December 2012 / In like new condition with only 2 hours of use! / 110 volt, 50/60Hz 10A power required / Requires SMA 905 fiber (fiber pictured/used during test not included) / Includes control software and one key (computer not included) / Output power set to three watts and measured at three watts

 

Coherent MIRA 900 Controller / Part Number 0163-709-00 / Powers up, no further testing has been done

 

 

CLC Control Laser Corp. Icon/Insignia LX-900 Maxwell Power Supply For Nd:YAG Marking System / Please see picture for model number / 220 Volt, Single Phase, 50/60 Hz power required / Tested operational

 

CLC Control Laser Corp. Icon/Insignia LX-900 RF Driver For Nd:YAG Marking System / Part Number 228692 / Tested operational

 

Lee Laser Nd:YAG Pump Chamber/Head Assy. / Model 120641-001 / Includes Rod, Lamp and Reflectors / Looks like it may be new old stock, can’t be sure

 

Lee Laser Autocollimator for Nd:YAG Laser Alignment / Part Number 010187-001 / 120V / Working

 

Continuum pulsed Nd:YAG laser system / Model Powerlite 7010 / 1064nm, 532nm, and 355nm operation / Manufactured 2001 / Single lamp, twin rod (oscillator, amplifier) pump chamber / Rated 850 mJ/pulse @ 1064 nm, 400 @ 532nm, and 200 @ 355nm / 6-8 ns pulse width at 1064nm, 5-7 ns pulse width at both 532nm and 355nm / 220/240V, single phase power required / Fundamental has been measured just under spec. (possibly needs tuned)

 

Continuum pulsed Nd:YAG laser system / Model Surelite SLI-20 / 1064 & 532 nm output / Manufactured August 2012 / Rated 420 mJ/pulse @ 1064 nm (we measured over 8.5 watts average power) at 20Hz rep rate with a 5-7 ns pulse width / Rated 160 mJ/pulse @ 532 nm (we measured almost 3.5 watts average power) at 20Hz rep rate with a 4-6 ns pulse width

 

Continuum pulsed Nd:YAG laser system / Model Surelite / 1064 & 532 nm output / 30 Hz

 

Applied Materials/Applied Baccini UV Laser Edge Deletion/Isolation system for crystalline silicon photovoltaic cell production / Includes Coherent AVIA 355-28 / Manufactured 2011 / 28 watts @ 355 nm / Excellent condition with less than 400 hours of use

 

Cook/Convergent Laser Technologies pulsed medical holmium laser system / Model Odyssey 30B / Manufactured June 2013 / Rated 30 watts

 

Dornier MedTech pulsed medical holmium laser system / Model Medilas H20 / Manufactured September 2006 / Rated 20 watts @ 2100nm

 

Coherent Verdi Laser System / Model Verdi-5W / Manufactured 2005 / 5 watts @ 532 nm / Tested operational

 

All equipment listed is subject to prior sale and availability. All information provided is believed to be accurate but Cleveland Laser Solutions, Inc. is not responsible for any errors, changes, or misrepresentations which may arise.